A rotational casting machine engineered for the model and
prototype shop. Every consideration has been given to create a machine that produces
hollow parts quickly and easily from soft tooling. You can pour casting material into a
mold, turn on the machine and come back the next morning to demold a perfect hollow part
that simulates blowmolding.
This is a variable speed rotational casting machine that runs on 110 electric, is timer controlled and operates unattended. You can produce a part in ten minutes or in 24 hours depending on your needs.
Affordable
| Portable | Breaker Protected | 110 Electric
| Power | Standard 110 Electric |
| Main Drive | Belt |
| Controls | Electric on/off, Electric variable speed, electrical timer, manual engage/disengage lever |
| Speed | 0-45 RPM |
| Mold Mounding Area | Zinc Plated Steel Platform to accommodate 36" x 24" mold |
| Maximum Mold Weights | Balanced - 100 Unbalanced - 100 |
| Floor area requirements | 4x4 feet |
| Ceiling Height Required | 7 ft. |
| Safety features | Built-in Breaker, power-on Lite, Slip Clutch |
| Setup | Plug in and go, roto-cast machine is portable/Store away when not in use |
| Price | $5,500 plus shipping |
| Purchasing Terms | 50% down, 50% upon Receipt |
| Shipping Weight | 350 lbs. |
| Pallet Size | 36" x 48" |
| Shipping Terms | Collect |
Every Mold and Model shop should have one! Email Us
Plaster Master Industries Home
Plaster Master Industries
4308 Shankweiler Rd. Orefield PA 18069
Phone (610) 391-9277 · Fax (610) 391-0340